LF3015CNR plate and tube laser cutting machine
3rd Generation Aluminum Gantry
- Manufactured with aerospace Standards
- Solidified with 4300 tons of press extrusion moulding
- Power can be reached at 6061 T6 after Ageing.
- 6061 T6 muscular gantry strength
- Utilising Aluminium material for the Gantry
- Good Durability, low Weight, erosion resistance, Anti-Oxidation with low Density due to Aluminium material.
- Truly high Processing Speed
Dual Use and Cost-saving
- ADK GR Series Fiber Laser Cutting Machine is a group of distance cut as well as metal Pipes cutting Machines.
- It has multiple uses and can save more than 50, which h effectively improves productivity.
Clamp Design
- It’s manufactured with a curvaceous clamp design on both sides and it can modulate the centre automatically.
- The diagonal adaptable range is 20- 300 mm.
Fractional Automatic Support Installation
It employs a smart tube support design, which can break the distortion problems in the process of long tube cut.
Without man-made operation, it can concentrate automatically
⦁ No man-made concentrating
Software automatically adjusts the concentrating the lenses to realise automatic Perforation and cut of different kinds of thick plates
The Speed of this cut head’s Performance 10 times fresh than the man-made head
⦁ Large adjustment range
The Adjustment range of the plate is -10 mm~ +10 mm, perfection 0.01 mm, suitable for 0 ~ 20 mm different types of plates.
⦁ Long Service Life
The collimator lens and concentrate lens both have a water-cooling heat sink which reduces the temperature of the cut head to enhance its life of the cut head.
Cubical Tube Welded Bed
- The Bed is manufactured by an Aircraft essence honeycomb Structure and in manufacturing the bed it uses a number of cubical tubes.
- The Stiffness of the tubes increases the strength and tensile strength of the bed; it also increases the resistance and stability of the guard rail so as to effectively avoid the distortion of the bed.
- The manufacturing process will be assuring 20 years of use without deformation;
- The cubical pipe Wall thickness is 10 mm and weighs 4700 kg.
High Transmission and Precision
German Technologies
ADK Fiber Laser Cutting is Equipped with truly high-Quality machine factors like Rake, Motor reducer, and numerous further. The reprise positioning preciseness of the machine tool can be 0.02 mm and the cut acceleration is 2.5 G. The working life is over 10 years.
Technical Parameters
| MODEL | LF3015CNR |
| Laser power Capacity | 1000W 2000W 3000W 4000W 6000W 8000W(Optional) |
| Working area | 3000mm x 1500mm |
| Repeat positioning accuracy | ±0.02mm |
| Maximum speed | 120m/min |
| Maximum acceleration | 1.5G |
| Specified voltage and frequency | 380V/50Hz/60Hz/60A |