It adopts an electric clamp design on both sides and it can modulate the center automatically. The diagonal adjustable range is 20-200mm.
- It adopts an up and down exchange platform, and the converter is responsible for controlling the exchanging motor.
- The machine is able to finish the platform exchanging within 15s.
3rd Generation Aluminum Gantry
⦁ Manufactured with aerospace Standers
⦁ Formed with 4300 tons of press extrusion molding
⦁ Strength can be reached at 6061 T6 after Aging.
⦁ 6061 T6 Strongest gantry strength
⦁ Using Aluminum material for the Gantry
⦁ Good Toughness, low Weight, corrosion resistance, Anti- Oxidation with low Density due to Aluminum material.
⦁ Very high Processing Speed
Dual Use and Cost-saving
- ADK GCR Series Fiber Laser Cutting Machine is a combo of Sheet cutting as well as metal Pipes cutting Machines.
- It has many uses and can save more than 50%, which h effectively improves productivity.
Fractional Automatic Support Installation
It employs intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.
Without manual operation, it can focus automatically
- Without Manual Focusing
The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.
- Bigger Adjustment Range
Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.
- Long Service Life
Collimator lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.
The Segmented Rectangular Tube Welded Bed
- The Bed is manufactured by an Aircraft metal honeycomb Structure and in manufacturing the bed it uses a number of rectangular tubes.
- The Stiffness of the tubes increases the strength and tensile strength of the bed it also increases the resistance and stability of the guide rail so as to effectively avoid the deformation of the bed.
- The manufacturing process will be ensuring 20 years of use without distortion;
- Rectangular pipe Wall thickness is 10mm and weighs 4700 kg.
Transmission and Precision
ADK Fiber laser Cutting is Equipped with very high-Quality machine Components like Rake, Motor reducer, and many more. The repeat positioning accuracy of the machine tool can be 0.02mm and the cutting acceleration is 2.5G. The working life is up to 10 years
|Laser power Capacity||1000W 2000W 3000W 4000W 6000W 8000W(Optional)|
|Working area||3000mm x 1500mm|
|Repeat positioning accuracy||±0.02mm|
|Specified voltage and frequency||380V/50Hz/60Hz/60A|