LF3015LNR plate and tube laser cutting machine

3rd Generation Aluminum Gantry

⦁ Manufactured with aerospace Standers
⦁ Formed with 4300 tons of press extrusion molding
⦁ Strength can be reached at 6061 T6 after Aging.
⦁ 6061 T6 Strongest gantry strength
⦁ Using Aluminum material for the Gantry
⦁ Good Toughness, low Weight, corrosion resistance, Anti- Oxidation with low Density due to Aluminum material.
⦁ Very high Processing Speed

Dual Use and Cost-saving

  • ADK GR Series Fiber Laser Cutting Machine is a combo of Sheet cutting as well as metal Pipes cutting Machines.
  • It has many uses and can save more than 50%, which h effectively improves productivity.

Clamp Design

⦁ It is manufactured with a pneumatic clamp design on both sides and it can modulate the center automatically.
⦁ The diagonal adjustable range is 20-300mm.

Fractional Automatic Support Installation

It employs an intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.

Without manual operation, it can focus automatically

⦁ No Manual Focusing

Software automatically adjusts the focusing the lenses to realize automatic Perforation and cutting of different kinds of thick plates
The Speed of this cutting head’s Performance 10times more than the manual head…

⦁ Large adjustment range

The Adjustment range of the head is -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.

⦁ Long Service Life

The collimator lens and focus lens both have a water-cooling heat sink which reduces the temperature of the cutting head to improve its life of the cutting head.

Rectangular Tube Welded Bed

  • The Bed is manufactured by an Aircraft metal honeycomb Structure and in manufacturing the bed it uses a number of rectangular tubes.
  • The Stiffness of the tubes increases the strength and tensile strength of the bed it also increases the resistance and stability of the guide rail so as to effectively avoid the deformation of the bed.
  • The manufacturing process will be ensuring 20 years of use without distortion;
  • Rectangular pipe Wall thickness is 10mm and weighs 4700 kg.

Transmission and Precision

German Technologies

ADK Fiber laser Cutting is Equipped with very high-Quality machine Components like Rake, Motor reducer, and many more. The repeat positioning accuracy of the machine tool can be 0.02mm and the cutting acceleration is 2.5G. The working life is up to 10 years

Technical Parameters

Laser power Capacity 1000W 2000W 3000W(Optional)
Working area 3000mm x 1500mm
Repeat positioning accuracy ±0.02mm
Maximum speed 80m/min
Maximum acceleration 1.0G
Specified voltage and frequency 380V/50Hz/60Hz/60A

    Feel free to get in touch!

    Contact Info

    Phone number


    Address info

    ADK Engineering & Solutions
    A-504, Empire Business Hub, Science City Road, Ahmedabad-380060, Gujarat – INDIA