LF60MS three chuck zero remains laser cutting machine
"0" Tail material
- Professional three-chuck configuration,full-stroke clamping,one machine can cut,open holes,cut arcs,hollow out,wear through,
- which greatly saves the cost of raw materials
Clamp Design
- It’s manufactured with a curvaceous clamp design on both sides and it can modulate the centre automatically.
- The diagonal adaptable range is 20- 300 mm
Fractional Automatic Support Installation
It employs intelligent tube support design, which can solve the distortion problems in the process of long tube cutting
Completely Automatic Feeding and unpacking Material Device
⦁ Automatic Feeding
Realise the smart raw material separation, feeding and flawless docking with the fiber laser cutting machine after the whole packets of tubes are placed in the feeding device, and assure that only one tube is delivered to the conveying arm each time.
⦁ Automatic Unloading
The finished product is automatically dropped to the storehouse caddy, double support-bearing peripheral support overlong tubes.
Technical Parameters
| Machine model | LF60MS |
| Laser power | 1000W 2000W 3000W 4000W 6000W 8000W(Optional) |
| Working area | 3000mm*1500mm |
| Dimensions | 11900*1880*2260mm |
| Repeat positioning accuracy | ±0.05mm |
| Maximum speed | 30m/min |
| Max. acceleration | 1.5G |
Without manual operation, it can focus automatically
⦁ No Manual Focusing
Software automatically adjusts the focusing the lenses to realize automatic Perforation and cutting of different kinds of thick plates The Speed of this cutting head’s Performance 10times more than the manual head…⦁ Large adjustment range
The Adjustment range of the head is -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.⦁ Long Service Life
The collimator lens and focus lens both have a water-cooling heat sink which reduces the temperature of the cutting head to improve its life of the cutting head.Fractional Automatic Support Installation
It employs intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.
